Description
| Specifications | |
|---|---|
| Model | olimpic k 230 evo T-ER1 |
| Made In | ITALY |
| Condition | New | General |
| Control System | Orion One Plus | Electrical |
| Voltage | 230 volts |
| Phase | 3-phase |
| Other Specifications |
|---|
|
Track feed speed: 9 m/min Panel thickness: 8-60 mm Thickness of edges in strips: 0.4 - 3 mm Thickness of rolled edges: 0.4 - 3 mm Max. section of rolled edges: 135 mm2 Coil-holder plate diameter: 780 mm Exceeding material to the panel thickness: 2+2 mm Distance between two successive panels: 600 mm Min. panel length with edge in rolls (100 mm min. width): 140 mm Min. panel length with edge in strips (100 mm min. width): 140 mm Min. length edge in rolls: 200 mm Min. length edge in strips: 260 mm Min. panel width (210 mm min. length): 90 mm Worktable height: 900 mm Opening for panel support roller: 500 mm Orion One Plus Control System
"AUTOSET" for composition T-ER1 It allows the machine set-up operations to be managed from the control panel at every changeover of machining. Includes:
"RT-V1" pre-milling unit Max. removal: 60 mm2 Max. removable thickness: 3 mm Panel thickness: 8 - 45 mm (60 mm with H=64 mm tool) Motor power: 1.5 kW Tool diameter: 100 mm Tool height: 49 mm Tool rotating speed: 9000 rpm "VC-V1" gluing unit With:
"SGP-E" glue pot - Instead of the standard one It allows a quick changeover of the glue type/colour. The glue pot is supplied instead of the one supplied with the gluing unit. Glue Capacity: 0.5 kg with pre-melting system or 1.5 kg with manual filling Installed power: 1.61 kW Heating time from environment: < 12 minutes Heating time from pre-heating: < 5 minutes
"K-2 radius" end cutting unit Motor power: 0.2 kW Speed of cutters: 12,000 rpm "R-K" trimming unit Motor power: 0.35 kW Speed of cutters: 12,000 rpm Min. panel thickness with radius: 12 mm Vertical/front copying devices: disc/wheel Tool radius: 2 mm "ROUND 1" rounding unit Carries out the automatic rounding of front and rear plastic edges angle of straight panels and panels with "radius" Motor power: 0.35 kW Speed of cutters: 12,000 rpm Panel thickness: 10 - 45 mm Min. Panel Length: 280 mm Distance between panels: 750 mm Vertical/front copying pads: pad/pad "RAS-V" edge scraping unit Eliminates the presence of notches left from the tools during the trimming from the plastic edges Min. panel thickness: 12 mm Vertical front copying devices: disc/disc Tool radius: 2 mm "RC-N" glue scraping unit Eliminates any excess of glue in the joint between panel and edge. It is also possible the removal of small edge exceeding (0.1 mm for 1 mm edges). Suitable for machining panels coming from nesting cycle. Includes:
"SP-M" brushing unit With two independent motors:
Additional Features
|
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.